Door tests

Run the following tests on your doors with Accessia Installer and share a commissioning report with your client

Test	Description	Results
Reader connection	Confirm that the Reader beeps and flashes green when running the test	Yes - Pass No - Fail
Lock state	Confirm that the door locks and then unlocks correctly	Yes - Pass No - Fail
Emergency exit	Confirm that the door locks and then unlocks correctly when emergency exit is pressed	Yes - Pass No - Fail
REX device	Asks the installer to activate the installed REX device and automatically checks it works as intended	REX activation works as intended - Pass REX activation does not work as intended - Fail
Door timings	Automatically measures the door timings The installer should sense check these measurements	Automatically passes, measurements are included in the generated commissioning report
Tamper detection	Automatically checks whether the Reader is reporting a tamper event	No tamper event detected - Pass Tamper event detected - Fail
Exit device height	Confirm that emergency release and exit buttons are fitted at the correct DDA height	Yes - Pass No - Fail
Voltage at lock	Measure and report the voltage at the lock	Voltage within expected range - Pass Voltage not within expected range - Fail