# Mounting the Hub

## Before you start

* Make sure the wall you want to mount the Hub on is indoors and vertical
* Choose a good position for the Hub in an area free from excessive temperature or moisture and where the ventilation holes will not be blocked

## How to mount the Hub

1. Use the key to unlock and then open the enclosure door. Optionally, you can slide the door upwards to remove it
2. Knock out the cable apertures where necessary for the external wiring and remove any burrs
3. Fit appropriately sized bushes to the cable apertures used for the external wiring and conduit
4. Secure the Hub to the wall using four 5mm diameter (no. 10) screws and wall anchors appropriate for the wall material, bearing in mind the weight of the Hub. There are four mounting holes for securing the Hub to the wall on the inside rear wall of the Hub enclosure

<figure><img src="/files/7sMowxMK0FbnduIP6EO5" alt="" width="362"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.accessia.com/hardware/ai-security-hub-hub-v1/mounting-the-hub.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.